|
| |
SUPPLIES:
-
Sweetbrier Studio™ “Art Deco
Maidens" Mold #2004
-
Paper Clay White, any brand
will work, I like Delight or Hearty Clay
-
Bo Bunny Back to Back Paper:
6” by 12”
-
Paper Mache Box approx. size
3” x 2” x l”
-
Rubber Stamp: PSX #C-583 Fern
-
Stamp Pad: Color Box® Olive
Pastel
-
Twinkling H2O’s Shimmering
Watercolors™: Chiffon Pink
-
Cardstock: Pink, light pink
and white
-
Glue suitable for paper
projects
-
Sandpaper: Medium Grit
Molding: Step by Step polymer clay molding instructions:
Molding: Step by Step Paper Clay molding instructions:
Molding: Step by Step UTEE molding instructions:
To demold, slightly flex the mold while using your thumbs to pull the part loose
around all sides. Gently push up on the molded part from the bottom as you flex
the mold to lift or tip the part from the mold.
DIRECTIONS:
1.
Using paper clay, mold one F-I (face). Allow to dry. If needed,
sand the back to smooth.
2.
Paint the face with Twinkling H2O’s Chiffon Pink.
3. Cut 12” x 6” of Bo Bunny Back to Back heavy weight paper.
Score and fold in half to make a card that is 6” x 6” square.
4.
Cut a 5 1/2” by 5 1/2” square of pink cardstock and adhere to
the front of the card as shown.
5.
Make the horizontal band:
a.
Cut a band of white cardstock 6” x 1 3/4”. Adhere near the
bottom of the card as shown.
b.
Cut a strip of light pink cardstock 6” X 1 1.2”. Adhere to the
white band as shown.
c.
Cut a strip of pink cardstock 6” by 1/2”. Adhere to the
light pink band as shown.
6.
Cut a 4” x 4” square of white cardstock. Stamp the circle of
ferns using Color Box Olive Pastel stamp pad in the pattern shown
7.
Adhere the stamped white cardstock to the center of the card as
shown.
8.
Adhere F-I in center of the stamped fern design.
Design by Terri Sproul
An original mold from SweetBrier
Studio™
A subsidiary of Miss Martha
Originals, Inc.
P.O. Box 5038 - Glencoe, Al. 35905
Telephone 256-492-0221 - Fax 256-492-0261
|
